User Manual

10 11
STEP 4
Remove both wires from the terminals of the existing switch and
cap with the provided wire nuts. Note: If you have more than two
wires connected to your switch (not including the bare copper or
green-coated ground wire), please see the 3-way, 4-way installation
instructions. It is not necessary to remove the ground wire.
NOTE: Your home’s wiring may differ; please consult a qualied electrician.
GROUND
(Usually Bare Copper or Green)
LOAD
(Usually Black)
LINE
(Usually Black,
Red or Blue)
NEUTRAL
(Usually White)
GROUND
(Usually Bare Copper
or Green)