User Manual

6 7

GETTING TO KNOW THE

iDEVICES

WALL SWITCH

Turn Light On. Used also for 3-way, 4-way pairing.

Turn Light Off. Used also for connecting to the Wi-Fi

network.

Status LED/Night Light. Provides setup status and used as a night light

during operation. Refer to LED color codes on page 42.

Pull Out Tab. Refer to this when prompted to enter your HomeKit™

setup code during the setup on a iOS device. Also used to document the

Wall Switch as the Primary or Secondary in a 3-way or 4-way conguration.

Device Reboot. Pressing this cycles power to the device.

Pairing Setup Button. Used to

wireless pair between multiple

Wall Switches for 3-way and 4-way

congurations and for connecting

to the Wi-Fi network.

DEVICE RESET: Press and hold for

10 seconds until LED blinks red.