User Manual

6 7
Before You Start
1. Read through this Installation Guide in its
entirety before starting installation of your
iDevices
®
Thermostat or removal of your
old thermostat. Incorrect installation can be
dangerous and can damage your iDevices
®
Thermostat and HVAC system. If you’re not
comfortable performing the installation,
contact a local HVAC contractor.
2. Turn the power to your HVAC system
and old thermostat OFF!
3. Ensure you do not have electric baseboard
heating. The iDevices
®
Thermostat is not
compatible with these systems.
4. Check that your mobile device is compatible
with the iDevices
®
Thermostat at
iDevicesinc.com/Compatibility.
5. If this is a new installation, you will need to
install the iDevices
®
Thermostat 4 – 5 feet
above the oor, in accordance with applicable
building codes. It should be installed in an
area with good airow. Avoid areas behind
doors, near corners, heating or cooling
vents, heat generating devices, or
direct sunlight. This Transmitter must be installed to
provide a separation distance of at least 20 cm from all persons
Installation Overview
1. Turn the power to your HVAC system OFF!
2. Remove the faceplate of your old thermostat
and photograph the existing
wiring conguration.
3. Disconnect your old thermostat’s wall
plate and secure the wires.
4. Mount your iDevices
®
Thermostat mounting
plate and attach wires to match your
system’s conguration.
5. Attach your iDevices
®
Thermostat to the
mounting plate.
6. Turn the power back ON.
7. Download the free iDevices
®
Connected app.
8. Connect your iDevices
®
Thermostat to your
home network and pair it to your iDevices
®
Connected app.
9. Set up and customize your iDevices
®
Thermostat within the iDevices
®
Connected app.
Professional Assistance
Your safety comes rst! If you don’t feel
comfortable installing your iDevices
®
Thermostat,
contact a local HVAC contractor.