Installation Guide

idh
by St. Simons, Inc.
Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories
Demand Quality, Demand idh
idhbrass.com
Installation Instructions
Professional Grade Quality Solid Brass
6-1/4” Edge Pull
Item# 14010
Dimensions:
 Overall Height: 6-1/4”
 Overall Width: 1-1/4”
 Center to Center: 5-3/8”
 Projection: 4-1/2”
 Net Weight: 7.5 oz.
 Gross Weight: 9 oz.
 Solid Brass Wood Screws
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
TOOLS REQUIRED:
Phillips Screwdriver, Drill, 3/32” Drill Bit for Pilot Holes, Hammer,
Small Chisel, and Pencil
1. Position in center of door edge approximately 40” to 42” from
bottom of door, with pull handle facing out. Mark outside shape
and screw hole locations.
2. Mortise door edge to fit plate and pull handle in position.
3. Drill, position, and secure.
Catalog Section: H
6-1/4” Edge Pull
Item# 14010
Date: Rev 05/18