Specification

by St. Simons, Inc.
Quality Solid Brass Decorative Hardware & Bath Accessories
“The Special Finishes Specialist” 
idhbrass.com
Product Data Sheet
Premium Grade Solid Brass
Pocket Privacy Pull
Item# 25411
Dimensions:
 Height: 2-3/4”
 Width: 2-1/2”
 Door Thickness: 1-3/8” to 1-3/4”
 Weight: 6 oz.
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Cut notch in door.
2. Position pull in notch.
3. Fasten and tighten screws.
4. Position mortise strike on jamb.
5. Drill a hole of 15/16” diameter and 1/2” deep in the
center of the mortise.
6. Screw strike plate into position.
To reverse outside plates on lock assembly, remove
machine screw on each side, change plates and re-
assemble. Ensure fork arm engages rocker pin.
Catalog Section: H
Pocket Privacy Pull
Item# 25411
Date: Rev 04/18