Datasheet

IDITECH CORPORATION
SPECIFICATION
TITLE SPC. NO.
PAGE 1 OF 4
MINI DIN JACK
DATE 2013.04.24
SPECIFICATION
1. Standard atmospheric condition
Unless otherwise specified, the standard range of atmospheric conditions for making measurements
and tests is as follows:
Ambient temperature5 to 35
Relative humidity 45% to 85%
Air pressure 86kPa to 106kPa
Operating temperature range﹕-40 to 85
Storage temperature range ﹕-40 to 85
2. Electrical characteristics
Item Conditions Specifications
2.1 Rated voltage/
Rated current
AC 100V 1A
Or
DC 12V 2A MAX.
2.2 Dielectric
strength
Between conductors which should not make
contact under normal conditions.
250V AC r.m.s50 to 60Hzfor 1 min.
trip current 2mA
Without breakdown
2.3 Insulation
resistance
A voltage of 250V DC shall be applied for a
minute. Between conductors which should not
make contact under normal conditions after
which measurement shall be made.
50MΩ MIN.
2.4 Contact resistance
Measurement shall be made
at 1000Hz with
small
current50mA
PinContact30mΩ MAX.
Plug coverSocket
50mΩ MAX.
ISSUE DATE WRTN CHKD
APVD DESCRIPTIONS
2013.04.24
JON JON ELVIS
SJACK/001

Summary of content (4 pages)