Instruction Manual
Brief introduction of Shenzhen DogCare Future Science and Technology Co., Ltd. Our company is co-founded by pet-related researchers and veteran pet lovers in China and the United States. We are committed to providing quality products and services for pet lovers and creating convenience for pets to better integrate into people's lives.
Contents 1.Packing list...............................................................................................................................1 2.Product introduction...............................................................................................................1 2.2 Functions introduction.................................................................................................. 3 3. APP Installation Notes.........................................................................
1.Packing list Open the outer box and check if the product components and accessories are complete against the following diagram. i g d i c h j l m f e k b a Illustration 1-1 a:main platform x 2 b:new diaper bin x 1 c:old diaper bin x 1 d:large clasp x 2 g:power adapter x 1 e:self tap screw x 10 f:cross screwdriver x 1 h:wooden stick x I i:diaper coil baffle x 6 j:set support x 2 k:set cloth x 1 l:instruction manual x 1 m:instruction manual (including warranty card and certificate) x 1 2.
voice intercom and real-time video viewing.It is recommended that the clean-up mode be set to "AI Smart detect automatic cleaning Dog defecation" to make the device more intelligent and reliable, and other cleanup modes can be selected as needed. 2.
Indicator light Power (green)/ Wifi indicator ， the green light is always on when the device is connected to the network motor lock (red) Roll indicator, four lights turn Illustration 2-4 into green counter-clockwise when diaper rolled up. Scan the QR code when the device needs to be shared Click to enter the device sharing interface Set up Add diaper Alarm pushs Click on the window to enter the video interface. Illustration 2-5 APP Device Control Interface 2.2 Functions introduction 2.2.
"clean up" key can be used for cleaning when the user needs to be cleaned by real-time video. The device is driven to roll the diaper after receiving the cleaning instruction, the used diaper is rolled into the old diaper bin, and when the infrared ray detects the volume of the diaper, the motor automatically stops the rolling, and the new diaper is just laid on the equipment platform.
3.1.1 IOS (Apple) or Android device a. Registration and login:it is recommended that the mobile phone number be registered directly after login. If you have WeChat or Alipay installed on your mobile phone and can use it normally, you can also choose to log in after authorization from WeChat or Alipay. Click here to add device Enter 6-bit and more password Figure 3-2 b.
Figure 3-3 c. Connecting devices: select a wireless network with the same device number as the Wifi list set up by the system, and then return to the APP interface after the connection is successful. Click to enter the Wifi list of your mobile phone. d.
Click this key after entering the home Wifi name and password, if the connection fails, return to step c to reconnect.
e. Add device Note that this device number is consistent with the device label. Figure 3-7 f.
3.2 Equipment assembly 3.2.1 Connect main platform Reverse the two main platforms, put the faces of the uninstalled buckle together, as shown in figure 3-9, then install the large clasp into the corresponding mounting slot of the two platforms, and tighten the screws. Install here Figure 3-9 3.2.2 Install the new diaper bin Place the assembled main platform in reverse, install the new cartridge on either side of the clasp connection, and tighten the screws.
3.2.3 Install the used diaper bin Install the old diaper bin to the other end of the main platform and tighten the screws. 3.3 installation of diaper rolls 3.3.1 APP add diapers When the diaper box is used out of the box, please scan the QR code on the outer box first so that you can see on the APP the number of diapers remaining in the box, that is, the number of diapers in stock.
3.3.2 Install diaper roll Install the bezel at both ends of the diaper roll and tear off the sticker on the edge of the diaper, as shown in figure 3 / 21. Stick both ends into the metal bracket for the new diaper coil, and then pull the diaper roll out to the right into the old diaper bin. The diaper side stickers stick to the stick, confirm the installation and press the manual stop button once to roll the diaper to the starting position and start to use it.
Figure 3-10 3.5 device placement It is recommended to keep the red line side of figure 3-11 against the wall so that the power cord is hidden without being easily touched. The green side can also lean against the wall on both sides of the red line, which makes it easy for cameras to shoot and observe and interact with dogs, so it's best to put it in the corner of the wall. Don't put it in the sun! Please also note the following four points.
After the device is powered on, all the LEDs are turned on about 3 seconds, and then only the power LED (green) is left , the Wifi indicator light is blinking when connect network, when the device connected to the network, the light is on. 4.2 Audio-video interaction Click on the window to enter the video interface. 4.2.
4.3 diaper cleaning 4.3.1 remote cleanup ①Alarm push : enter the APP alarm message list from the cell phone notification bar, click on the most recent alarm, enter the alarm details, clean up as needed. Note that if you receive a push message that has not been viewed and cleaned for a long time, it is recommended to enter the video interface to learn about the latest usage of diapers on the device and confirm the cleanup.
See step 3.3. When you add a diaper on the app, if the QR code on the diaper box has been swept when the diaper scroll was previously added, you do not need to scan it, just scan the QR code on the diaper scroll. 4.
FCC statement This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interfer ence that may cause undesired operation. RF exposure warning : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
