User's Manual

_[
6.4.4. Not aligned color print.
z Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80
card (54mm x 86mm).
z Uneven or bad card surface.
Change the card.
z The transfer roller or printing roller is
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit as section 6.1.
z Worn-out printer.
Please contact the local supplier.
6.4.5. Unplanned color print.
z Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80 card
(54mm x 86mm).
z Uneven or bad card surface.
Change the card.
z The transfer roller or printing roller is
contaminated with the dust and dirt.
Clean the rollers with the cleaning kit as section 6.1.
z Worn-out printer.
Please contact the local supplier.
6.5. Magnetic stripe encoding
6.5.1. Magnetic encoding error.
First of all, Please press left LED button to retry.
z The magnetic head is contaminated with the dust and dirt.
Clean the magnetic head with the cleaning kit.
z The magnetic encoding data is not transmitted or the w rong data is transmitted.
Check the setting of the program and the driver and the magnetic encoding data you
transmitted.
z The card is not magnetic card, or inserting direction is wrong.
Change the card or the direction.
z Bad magnetic stripes on t h e card.
Change the card.
6.6. General operation
6.6.1. Ribbon snapped during printing.
Open the top cover and take out the cartridge. After putting the snapped pieces on together,
install the cartridge again. Check the followings if this kind of problem occur frequently
.
z Non-standard cards or bad cards.
Change the cards. You can use only ISO CR-80 card (54mm x 86mm).
z Too high or low setting of the color density.
Please contact the local supplier. The color density default of your printer needs to be
changed.
Pic.148
Printing qual ity trouble 4
Pic.149
Printing qual ity trouble 5