User's Manual

Figure 3 Rear side of Input Hopper

1.2.2 Encoding station (Being developed)

SMART-70 Encoding Station is designed to read barcode printed on card and support various

types of encoding. By using Encoding Station, multiple cards can be simultaneously printed and

encoded to enhance issuance speed.

Various optional encoders can be installed in Encoding Station as below. Optional encoding

modules can be purchased according to your needs.

 Barcode reader

 1D Barcode: Code32, Code39, Code93, Code128, Codaba, EAN 128, …

 2D Barcode: PDF417, MicroPDF417, MaxiCode, DataMatrix, QR Code, …

 Magnetic encoder

 ISO7811 HiCo / LoCo Card

 JIS2 Card

 Contact smart card encoder

 ISO 7816 A/B/C Card

2 3 4 5

① Kensington lock

Kensington lock is usable.

② Communication port

To communicate between SMART-70 modules,

please connect to an adjacent module.

③ Serial communication port

This port is used when an external device

controls Input Hopper.

④ Power port

Please connect the 24V DC power adaptor

provided with Input Hopper.

⑤ Power switch

Turn On/Off