User's Manual

Figure 88 CardPrinter70Setup Log-in
Password input window is displayed when you run
this program. If
the correct password is inputted,
the
recorded setup values in SMART-
70 Printer are
shown and the
setup values can be adjusted.
The password
for SMART-70 Printer is saved to
the
SMART-70 Printer. When the SMART-70
Printer is connected to another PC
, the saved
password in the SMART
-70 Printer is required to
run this utility and adjust the Printer setting
.
(Since t
here is no default password in SMART-70
Printer, p
lease click “OK” if password have never
been set
.)
Figure 89 CardPrinter70Setup Start
When you
are successful to login, the basic setup
of Printer
is shown as Figure 89.
4.1.2 Basic Setup
The basic setup of CardPrinter70Setup shows the firmware version, serial number and etc. of
the connected SMART-70 Printer, frequently used setting values (printing position, density and
etc.) can be adjusted.
60