User's Manual

84
Figure 125 Card jam in Laminator 5
E. Card jam in Laminator 5
If laminating film is cut, please stick the cut
laminating film together by using a sticky tape
and then turn the dial on film cartridge until
unused laminating film is on take-up core.
5.3.5 Card jam in Output Hopper
Figure 126 Card jam in Output Hopper 1
A. Card jam in Output Hopper 1
Please separate Output Hopper as Figure after
disconnecting power adaptor and
communication cable at rear side.
Figure 127 Card jam in Output Hopper 2
B. Card jam in Output Hopper 2
If card is jammed on the card gate of Output
Hopper as Figure, please remove the jammed
card by pulling out.