User Guide

Product Introduction
Front View:
Paper Outlet
Power Button
Left Cover
Opening Button
Right Cover
Opening Button
Paper Inlet
Panel
Top Cover
Rear View:
USB Port
Power Port
Inside View:
Accessories
Power Adapter*1
USB Cable*1
Loading the Ribbon
Open the top cover and then open the panel01
Open the top cover first, then press the open cover button on both sides of the panel
at the same time before lifting the panel upward.
Loading the Ribbon
02
Install the ribbon into the printer by pinching the left and right wings of the ribbon
with both hands.
Note: The side with the anti-counterfeit label is facing the paper outlet.
Turn the panel down and press it with both hands until you hear a "pop" sound.
Close the Panel
03
Anti-Counterfeit Label
Putting in the paper
Putting in the paper
01
Put in the paper as shown, up to 20 sheets of A4 paper can be placed at once.
Power On
Connecting Power
Power On
Note: Long pressing the power button can power off the printer.
01
02
Long press the power button for 3 seconds to power on the printer.
Plug the power cable into the power port on the back of the printer.
Tips:
All the drawings of the product and accessories in the manual are for reference only.
Due to the updating and upgrading of the product, there may be some differences
between the actual product and the drawings, please refer to the actual product.
For more product information, please contact iDPRT customer service.
Product Name: Wireless AI Printer Dimensions: 295.5*147.3*69.3mm
Product Model: Future 999 Weight: About 1553g (excluded accessories)
Input Parameter: DC 14V Operating Temperature:
Wi-Fi Connection: Wi-Fi IEEE 802.11b/g/n 2.4GHz
0℃ ~ 40℃
Future 999
Ribbon
Manufacturer: Xiamen Hanin Electronic Technology Co., Ltd.
Add: No.96, Rongyuan Road, Tong'an District, Xiamen, China, 361100
Customer Service Email: [e-mail]
After Service Web : https://idprt.afterservice.vip
Web: www.idprt.com [phone]
After Service