User's Manual

HM-E200 User Manual
24

Correct example:
Incorrect example:
To grasp a magnetic card
To move a magnetic card
Make sure the magnetic stripe is towards to the
magnetic head. Hold the card in the center as
illustrated below and swipe it straight at a steady
speed in the direction of arrows.
If you grasp the front/rear part of a card and move it
through the MSR slot,the front /rear part is loose
and a read error occurs.
If you insert a card tilted upward/downward into
the MSR slot,the card does not move horizontally
and a read error occurs.
If you extract a card at the end of the MSR slot by
lifting up or lowering down,the card is not
maintained and a read error occurs.
If you insert a card into the middle part of the MSR
card ,the card is not read correctly and read error
occurs,or if you move the card back or forth by force
after inserting into the MSR slot,the card is not read
correctly and a read error occurs.