User's Manual

HM-E200 User Manual
28
Table 5-1 General Specification(Continued)
(2/2)
Item
Parameter
Charging
USB charge
Output DC 5V 1A
Power supply
Battery
1300mA 3.7V rechargeable battery pack
Battery
operating time
keep working for about 1 hour(printing full lines of
characters)
LCD
128 x 64 dots with Blue Backlight
MSR
(Single Head)
Format
ISO 7810, ISO 7811, ISO7812 1st, 2nd and 3rd Track/ JISII
Track Reading
Security
AES or 3DES encryption. DUKPT Key Management
Paper
Paper type
Thermal paper
Paper width
57.5±0.5mm
Paper thickness
0.053mmX 0.12mm
Roll paper diameter
13mmØ40.5mm
Recommended paper
P220AG, PD450, FD200, Alpha 400-2.1
Physical
characteristics
Operation condition
-5°C to 50°C, 25% to 85%RH
Storage condition
-30°C to 60°C, 5% to 95%RH
Dimension
84.4(W) x 126.8(D) x 51.5(H) mm
Weight
237g (including battery pack)
Reliability
TPH
50km(not more than 12.5% printing density)/100 million
pulses
Software
Emulation
ESC/POS
Driver
Win xp/Win 7/Win 8/Win 10/Linux
SDK
WinCE, Win Mobile, Android, IOS,Linux
WARNING:
Please use the recommended thermal paper or same quality paper, otherwise it will influence the
printing quality and decrease the thermal print head life.
Please use at a room temperature if you want to set the print density to “Special”.
Some types of the paper are not suitable for use in low-temperature environment.