SP410 User Manual Xiamen Hanin Electronic Technology Co., Ltd. ADD: 5F, 10#, Aide Airport Industrial Park, Huli District, Xiamen, China Web: www.idprt.com E-Mail info@idprt.
CONTENT IMPORTANT SAFETY INSTRUCTIONS ............................................................................................... 4 CHAPTER 1 INTRODUCTION ............................................................................................................ 7 1.1 Packing List ........................................................................................................................ 7 1.2 Appearance and Components ........................................................................
SP410 User Manual ◼ Statement This manual content may be changed without permission and our company reserve the rights to make changes in technology, spare parts, hardware and software of the products. Please contract our company, if the user needs further information about the products. Without any written permission from our company, any section of this manual is prohibited to be copied or transferred in any form.
SP410 User Manual IMPORTANT SAFETY INSTRUCTIONS Before using the printer, please read carefully the following safety consideration in case of bodily injury or equipment damage. 1.Safety warning The print head will become very hot during printing, please do not touch the printhead and peripheral parts during printing and printing just finished. Please do not touch the printhead and connectors, in case that static damages the printer head. 2.
SP410 User Manual • After the disappearance of the smoke, call your dealer to repair it. 2) Install the printer on the stable surface. • If the printer falls, it may be broken and you may hurt yourself. 3) Use the approved accessories only and do not try to disassemble, repair or remodel it by yourself. • Call your dealer when you need these services. • Do not touch the blade of auto cutter. 4) Do not let water or other foreign objects drop into the printer.
SP410 User Manual 3.Other Precautions The copyright for this user manual and various other manuals is property of our company. Any copying or conversion into electronic form and saving of this material without the express written permission is strictly prohibited. Use of the information contained in this manual is not subject to any patent liability. This manual has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions.
SP410 User Manual CHAPTER 1 INTRODUCTION 1.1 Packing List Unpack the printer and keep the packing materials in case you need to ship the printer in the future. Any damages exist, please contact the local dealer. ■Standard Note：The packing materials are based on the order. 1.2 Appearance and Components ■Front View ■Rear View ■Inside View Note：The views above are for your reference. Ports vary by your choice.
SP410 User Manual CHAPTER 2 INSTALLATION & USAGE 2.1 Printer Connection 2.1.1 Power Connection 1. Make sure the printer’s power switch is in the off position. 2. Connect the power cord to printer. 3. Connect the other end of power cord to the outlet. NOTE: 1.Use the original power adapter only, in case that the damage caused by charging improperly. 2.Please unplug the printer power cord if it is not in use for a long time. 2.1.2 USB Connection Connect the USB cable to the printer and PC.
SP410 User Manual 2.2 Fanfold Label Loading ■ Folding Paper Loading 1. Turn the power on, adjust the paper 2. Insert the paper into the entry slot. guide to fit the width of paper. 3. The paper will be sucked into the paper guide automatically. ■ Roll Type Label Loading NOTE: 1) When the printer is power on, the paper will be sucked into the paper guide automatically. 2) The roll type label holder needs to be aligned with the hooks at the bottom of the printer.
SP410 User Manual 2.3 Operation Panel 1.Feed Button: ◼ Turn on In the shutdown state, turn on the power switch behind the printer, then the indicator will be light on. ◼ Turn off When the power switch is turned off, the printer shuts down and the indicator light is off. In the power-on state, turn off the power switch behind the printer, then the indicator will be light off.
SP410 User Manual CHAPTER 3 MAINTENANCE & ADJUSTMENT Adhesives and coatings of the media can transfer to the printer parts over time along the media path including the thermal print head and media sensor. This build-up can accumulate dust and debris. Failure to clean the print head, media path, and media sensor could result in inadvertent loss of labels, label jams and possible damage to the printer. Note: 1. Make sure to turn off the printer before cleaning. 2.
SP410 User Manual CHAPTER 4 LABEL PRINTER UTILITY INSTRUCTIONS 4.1 Installation Preparation Download the utility application in www.idprt.com. 4.2 Usage Note: the following takes Windows 7 operating system for example, which may vary depending on the operating system on your computer. 1.Download “UtilityForLabel_V1.0.0.0”. 2.Then open the “UtilityForLabel_Channel.exe”.
SP410 User Manual 3.Add/Modify/Delete Printer, Connect Test. ●Click “Modify Printer”. Choose the printer and port (e.g. USB), then click “OK”, showed in “Printer List”. ●Click “Delete Printer”. Click “OK” to delete the printer and click “Cancel” to cancel the command.
SP410 User Manual ●Click “Connect Test” to test whether the connection is successful or not. If connection succeeds, it shows as follows. If connection fails, it shows as follows. Note: 1) Please connect your printer to power firstly, choose one port (depend on the printer you bought) to connect to the PC. Connecting method refer to the Power Connection. 2) When connection fails, please check the connection or whether the port matches.
SP410 User Manual 4.Function. ●Click “Printer Information”, showing printer information. (varies by different printers) ●Click “Print Test Text”. Type the text. Click “Print”, then printer starts to print the test text.
SP410 User Manual ●Click “Parameter Setting”. User can set up the density, paper mode and so on.
SP410 User Manual 1) Print density (choose range:0~15): 2) Heat Adjust 17
SP410 User Manual 3) Paper Mode (Gap, Continuous, Black Mark): 4) Print Speed (choose range:2~6): 18
SP410 User Manual 5) Codepage: 6) Click “Set” and back to the main menu. ●Click “Restore Factory Settings”. Click “OK” to restore factory settings and click “Cancel” to cancel the command. 5.Click “Quit”, and finish printer settings.
SP410 User Manual CHAPTER 5 WINDOWS DRIVER INSTRUCTION 5.1 Installation Preparation Download Windows Driver application in www.idprt.com. 5.2 Installation Warning: There are some differences under different operating system. Please operate it according to the tips. Recommend to close security software before installation in case of preventing installation. 1.Select one interface to connect your printer to computer. 2.Turn on the printer and check if it is connected to computer successfully. 3.
SP410 User Manual 5.Select the default installation port name of printer driver, then click “Next”. 6.Click"Finish".
SP410 User Manual 7.After installation, the icon will be found in “Start” → “Devices and Printers”. Note: If you have already installed the driver (No matter what kind of ports), it will generate a USB port automatically when connecting the printer to computer. 5.3 Usage 5.3.1 Printing Preferences 1.Click “Start” → “Devices and Printers”. Right click the icon and choose “Printing preferences”.
SP410 User Manual 2.According to different needs, set the page.
SP410 User Manual ●Click “Paper Name”, then choose the paper type. ●Click “Manager” to add a new stock. ●Choose “Rotate” or “Effect”, it will be showed in the “Preview”.
SP410 User Manual ●Click “Advanced” to set “Save Paper”, “Density”, “Speed”, “Test”, “Media Handling”, “Media Type”.
SP410 User Manual 3) Speed 4) Test 26
SP410 User Manual 5) Media Handling 6) Media type 27
SP410 User Manual 3.Click “Watermark”, it recommends to use BMP format.
SP410 User Manual 4.Click “Halftone”.
SP410 User Manual 5.3.2 Printer Properties 1.Click “Start” → “Devices and Printers”. Right click the icon and choose “Printer properties”.
SP410 User Manual 2.Click “General” → “Print Test Page”, and printer will print labels with current settings.
SP410 User Manual 3.Click “Ports”, then choose the port needed. E.g. Configure the port to Serial Port. 1) Choose the Srial Port (COM1), click “Configur Port”.
SP410 User Manual 2) After opening the “Configure Port”, you can view the port data by printing the self-test page and and change the information on the "port setting"(as shown in the picture) to the same port data on the self-test page. After the modification, click "OK" 3) Click "apply" to configure the new port.
SP410 User Manual 4.Click “Advanced” to set the available time for the printer.
SP410 User Manual 5.4 Removing Note: Please turn off the printer or unplug the USB cable before removing the driver. 1.Double click Windows Driver. 2.Choose “Uninstall printer driver”, then click “Next”.
SP410 User Manual 3.Choose the printer driver name needed to uninstall, then click “Next”. 4.Click"Yes".
SP410 User Manual CHAPTER 6 MAC DRIVER INSTRUCITON This Driver Installation Manual provides information on installation in macOS operation system. 6.1 Driver Preparation for macOS Download the Mac Driver application in www.idprt.com. 6.2 Driver Installation for macOS Warning: Under different operating system, the screen has slight difference. Please operate it according to the tips. Take SP410 (macOS 10.15) as example. 1. Double click the Driver, click “Continue”.
SP410 User Manual 2. Select a destination and click “Continue”.
SP410 User Manual 3. Choose “Installation Type” and click “Continue”-> “Install”.
SP410 User Manual 4. Type in the password of your computer. 5.The installation was successful.
SP410 User Manual 6. Turn on the printer and connect it to your computer (for example: via USB cable) 7. Click: Launchpad -> System Preferences -> Printers & Scanners. 8. Under “Printer & Scanner”, printer SP410 is available.
