User's Manual

IDRO900F User's Manual
11
IDentification with Radio and Optical
There are 3 LED status indicators located at the bottom of IDRO900F RFID Reader, which represent the status of the
reader as follows.
[ Figure 3.1.2 ] IDRO900F Status LED
[ Table 3.1.1 ] IDRO900F Status LED
Number
Color
Name
Indication
1
Green
Read
OFF : RF off
Blinking : Tag Read
2
Yellow
User
TBD
3
Red
Power
OFF : Power off
ON : Power on
3. 2 RFID Reader Software
IDRO900F is provided with software applications that can be used to configure and control RFID Reader.
3. 2. 1 Reader@Express
Reader@Express is an RFID Reader application that provides access to RFID Reader.
If you enter the IP address of RFID Reader in to a web browser, you can set the RFID Reader over the Internet.
This application provides the function to set the RFID Reader’s communication, network and operational
parameters.
It also provides the function to read tags, review tag data, and checking the condition of the device.
This application is used to manage the RFID Reader installed.
For more information, please refer to "User's manual for Reader@Express".
1
2
3