IDRO UHF Fixed Type 4 Port RFID Reader : User's Manual : Page 24

IDRO900F User's Manual

24

IDentification with Radio and Optical

• Connection Diagram

Use Power from external devices (LAMP or Buzzer) for power(V+,V-).

Select a product with an external device voltage of 5 to 24 VDC.

5~24VDC

Tower Lamp

(ST45B-1-12-R)

BLACK

LAMP : RED

or

BUZZER : BROWN

[Figure 6.5.2 ] IDRO900F GPIO Output Connections

• Operating method

①. Click Properties on the Reader@Express → Click GPIO and set the Output like below → Apply →

Close

> OUTPUT LEVEL : Display the output level status before Inventory.

- L : Lamp or BUZZER OFF

- H : Lamp or BUZZER ON

> OUTPUT FLASH : Display the output level status when tag reading after Inventory.

- L : Lamp or BUZZER OFF

- H : Lamp or BUZZER ON

- Duration (msec) : Set the Lamp or Buzzer on/off time.

> If OUTPUT LEVEL and OUTPUT FLASH are set as shown above, when LAMP is connected to GPIO

output 1 port, it operates as follows.