User's Manual

IDRO900F User's Manual
7
IDentification with Radio and Optical
2. 1 Overview
This document is for the setup and operation of the IDRO900F RFID Reader System. Before you use this device,
you should be familiar with the following :
• Installing and Operating Windows-based software.
• Device communication parameters including Ethernet and Serial communications.
• RFID Reader Configuration including Antenna Placement
• Basic digital Input/Output control.
2. 2 Configurations
This guide covers the following IDRO900F series of RFID Readers :
[ TABLE 2.2.1 ] IDRO900F Reader Part Number
Part Number
Description
IDRO900F-WW
 KOREA, USA, WORLD WIDE
IDRO900F -EU
 EUROPE
IDRO900V -JP
 JAPAN
IDRO900V -CN
 CHINA
2. 3 About the Chapter
The topics covered in this Guide are as follows.
• Chapter 3, Getting Started – Provides a brief overview of IDRO900F hardware and software.
• Chapter 4, RFID Reader Installation – Describes the mechanical and electrical installation methods of IDRO900F.
• Chapter 5, RFID Reader Components – Provides IDRO900F and Accessory information.
• Chapter 6, RFID Reader Electrical Specifications – Provides electrical & environmental information and Interface
specification.
2. About This Guide