User's Manual

AM600 – Ver. 1.0 – User Manual
Mod: MDM/011/M2 Rev 6
IDS GeoRadar Srl User Manual MNG/2020/001 Rev. 1.0 9/ 17
5 HOW TO OPERATE AM600 GPR unit
On top of the cover of the AM600 GPR antenna unit there are 3 external
connectors and 1 button (Fig. 4):
• IN: 19 pin multipolar connector, providing power supply and
Ethernet connectivity.
• OUT: 19 pin multipolar connector, providing power supply and
Ethernet connectivity towards other AM600 modules.
• WHEEL: 4 pin connector, compatible with IDS Georadar’s survey kit.
• BUTTON: power button
Fig. 4 – AM600 connections
To correctly operate the AM600 antenna, the user must apply the following
steps:
1. Connect on end of the multipolar cable provided with the unit to IN
port (Fig. 5).
Fig. 5 – Connection of multipolar cable
2. Connect the other end of the multipolar cable to the junction box
(provided with AM600 unit) (Fig. 6).
3. Connect the junction box to a laptop via standard Ethernet cable
(having RJ 45 connectors) and battery cable (provided with AM600
unit) (Fig. 6).
4. Connect the battery cable to a 12V-12Ah sealed lead battery (Fig.
6).