User's Manual

AM600 – Ver. 1.0 – User Manual
Mod: MDM/011/M2 Rev 6
IDS GeoRadar Srl User Manual MNG/2020/001 Rev. 1.0 4/ 17
2 HOW TO READ THE MANUAL
2.1 Manual Layout
This manual is meant to be a quick assembly reference guide, that helps you
during transfer from the office to the jobsite, for the AM600 GPR unit.
2.2 SYMBOLS
Warning messages are an essential part of the Safety Concept of the
instrument. They appear wherever hazards or hazardous situations can
occur.
Type
Description
WARNING
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
DANGER
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, could result
in death or serious injury.
CAUTION
Indicates a potentially hazardous situation or an
unintended use which, if not avoided, may result
in minor or moderate injury.
Warning messages:
• make the user alert about direct and indirect hazards concerning the use
of the product.
• contain general rules of behaviour.
For the user’s safety, all safety instructions and safety messages shall be
strictly observed and followed. Therefore, the manual must always be
available to all persons performing any tasks described herein.
DANGER, WARNING, CAUTION and NOTICE are standardized signal words
for identifying levels of hazards and risks related to personal injury and
property damage.
For your safety it is important to read and fully understand the table below
with the different signal words and their definitions. Supplementary safety
information symbols may be placed within a warning message as well as
supplementary text.
Note text/to keep in mind
Tip text