User's Manual

SYSTEM BREAKDOWN
IDS GeoRadar S.r.l. MNG/2017/009 Rev 1.1 19/ 54
Fig. 10 – Pan-Tilt Unit
The elevation pointing system is fixed on the Arc SAR arm through 2 cam
levers and 2 knobs. The cam levers are the rotation fulcrums of the pointing
system, while the knobs permit to select different Radar Sensor bearings,
between -30° and +30° (see Fig. 11). In Hydra-G LP configuration the
Elevation Pointing System must always be positioned at 0°; in Hydra-G HP
and Hydra U configuration the position must be the same of the Camera
tilting angle (see Par.5.7).
Fig. 11 – Elevation Pointing System
2 screw holes under the elevation pointing system permits the installation
of IR Laser under the Elevation Pointing System (see Fig. 12).
PTU
Arc SAR arm
Elevation
Pointing System
Triggering Sensor