User's Manual

HOW TO INSTALL AN HYDRA-U SYSTEM
IDS GeoRadar S.r.l. MNG/2017/009 Rev 1.1 36/ 54
4. Mount the PTU on the Tripod by accommodating the metallic cylinder
(bottom of the PTU) in the Tripod’s cylindrical housing (Fig. 42);
Fig. 42 – Mounting the PTU on the Tripod
5. Rotate the Positioning Unit on the Tripod until it is possible to access
the fixing screw in the Tripod’s cylindrical housing;
6. Use the hex key with the red handle, provided with the Tripod, to screw
on the Positioning Unit to the Tripod (Fig. 43);
Fig. 43 – Secure the PTU to the Tripod
7. Pull out the Camera (already mounted on its mechanical holding
system) from the transport bag;