User's Manual

HOW TO INSTALL AN HYDRA-U SYSTEM
IDS GeoRadar S.r.l. MNG/2017/009 Rev 1.1 38/ 54
12. Use the 2 quarter turn screws to point the Radar Sensor at 0° (Fig. 46);
Fig. 46 – Radar Sensor pointing system
13. Connect the PTU Data Cable, the Triggering Sensor Cable, and the Laser
Cable, to the back of the Radar Sensor (Fig. 47);
Fig. 47 – Radar Sensor cabling
Check the gap between the magnetic sensor and the magnetic trigger;
the gap needs to be 0.1÷3mm for correct functioning