User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N°doc: MN/2009/070 - Rev. 1.1
IBIS-L v.02.00 - User manual
34 / 65
All information contained in this document is property of IDS. All rights reserved.
3.4 Installation kit
The installation kit consists of a template for positioning and drilling holes in the base
(Fig. 3.18) together with a spacer and elements for anchoring the linear scanner as shown
in Fig. 3.19.
Fig. 3.18 – View of the drilling and positioning template with spacer
6 spherical thrust bearings consisting
of two parts and 6 disc springs
3 long M16 nuts, 6 bolts and 6
washers
2 short M16 nuts, 4 bolts and 4
washers 3 base M16 washers
1 positioning fork; 1 spherical housing
Fig. 3.19 – Elements for anchoring the linear scanner
The entire system has been studied to be able to accurately reposition the equipment even
after a long period of time has elapsed. For this reason, once installed, the anchoring