User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N°doc: MN/2009/070 - Rev. 1.1

IBIS-L v.02.00 - User manual

35 / 65

elements must remain installed at the measurement site since they are the basis of the

positioning reference.

For this reason, when the instrument is dismantled, we recommend you to protect the

anchoring elements with a wooden casing fixed to the base structure with plugs and

screws to avoid them being accidentally damaged or exposed to extreme weather

conditions.

A complete description of the installation procedure is given in par. 4.1

3.5 Power supply module

The power supply module supplies electric power to the system, in detail its function is to:

• Receive power from the mains electricity or from a generator set;

• Charge the pair of batteries required to guarantee continuous power supply even

in the case of a blackout;

• Distribute power and signal to the linear scanner and IBIS-L sensor.

It is a box with dimensions 560x600x840 mm, with two handles, two wheels for ease of

movement and three doors fitted with locks. Fig. 3.20 provides two views of the power

supply module.

Fig. 3.20 – Front (left) and back (right) view of the power supply module. Note the

handles, two wheels and three lockable doors

When the power supply unit is delivered, the handles are folded downwards to reduce

bulk and risk of damage during transportation. To reposition the handles proceed as

follows for both handles (following the procedure shown in sequence in Fig. 3.22):

1. completely unscrew the top screw on the handle blocking mechanism and loosen

the lower screw;

2. rotate the handle anticlockwise until it is positioned upright;

3. reinsert and screw in the previously removed screw

4. tighten both screws.

Back door

Top

container

Front

door