User's Manual

IDS Ingegneria Dei Sistemi S.p.A. N°doc: MN/2009/070 - Rev. 1.1
IBIS-L v.02.00 - User manual
60 / 65
All information contained in this document is property of IDS. All rights reserved.
6.2 Use
When you want to download data directly from the PC onto an external USB HD, the
control program has to be paused (we recommend you pause the system when the trolley
is positioned in the centre of the track, waiting to perform a new acquisition), then
download the data and restart the acquisition. If you have to disconnect the USB
connector from the apparatus, the program will signal a missing device error and you will
have to shut down and restart the software.
When the apparatus is functioning, ensure that nobody can pass or stand in front of the
IBIS sensor to avoid ruining the acquisition. Also make sure that there is no vegetation
high enough to block the electromagnetic waves.
6.3 Dismantling
When dismantling the measurement site, carefully check exactly what is to be removed
and accurately place the pieces to be stored in the packing cases.
In addition, make sure the elements that remain on the site for a subsequent measurement
campaign are sufficiently protected. For this reason, we recommend you cover the
elements with a wooden box, to be fixed to the base using plugs and screws, and that you
lubricate the spherical housing well with water repellent silicon grease.