User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2

Safe Rail System Data Acquisition Software

B.1.1 SRS_PLUS Control Unit specifications......................................................66

B.2 - SRS-FW400 System Technical Specifications..................................................67

B.2.1 Control Unit specifications........................................................................67

Appendix C - Using GPS with the SRS system...........................................................68

Appendix D - Using camera with the SRS system......................................................72

FIGURES INDEX

FIG. 2-1 – VIEW OF CONTROL UNIT, START UP SIDE............................................15

FIG. 2-2 – VIEW OF CONTROL UNIT, ANTENNA CONNECTORS SIDE................16

FIG. 2-3 – SRS-FW400 CONTROL UNIT FRONT PANEL WITH BATTERY PORT,

LAN PORT AND WIRELESS CONNECTOR ........................................................17

FIG. 2-4-SRS-FW400 CONTROL UNIT REAR PANEL WITH CONNECTIONS TO

POSITION SENSOR AND ANTENNAS.................................................................17

FIG. 2-5 – SRS ANTENNA WITH A 19 POLE CONNECTOR AND POSSIBILITY OF

A CASCADE CONNECTION..................................................................................18

FIG. 2-6 – PANASONIC TOUGHBOOK CF-30.............................................................18

FIG. 2-7 – LAN CABLE...................................................................................................19

FIG. 2-8 – LAN CABLE CONNECTION BETWEEN THE NOTEBOOK COMPUTER

AND THE CONTROL UNIT (SRS_PLUS).............................................................20

FIG. 2-9 – LAN CABLE CONNECTION BETWEEN THE NOTEBOOK COMPUTER

AND THE CONTROL UNIT (SRS-FW400 ONLY) ...............................................20

FIG. 2-10 – BATTERY CABLE.......................................................................................21

FIG. 2-11 – CONNECTING THE CONTROL UNIT TO THE BATTERY (SRS_PLUS)

...................................................................................................................................21

FIG. 2-12 – BATTERY CABLE.......................................................................................21

FIG. 2-13 – CONNECTING THE CONTROL UNIT TO THE BATTERY (SRS-FW400

ONLY).......................................................................................................................21

FIG. 2-14 – POWER SUPPLY CABLE AND CONNECTION TO THE CONTROL

UNIT..........................................................................................................................22

FIG. 2-15 – POSITION SENSOR .....................................................................................22

FIG. 2-16 – WHEEL PORT ON THE SRS_PLUS CONTROL UNIT ............................23

FIG. 2-17 – WHEEL PORT ON THE SRS-FW400 CONTROL UNIT...........................23

FIG. 2-18 – 400M HZ SRS_PLUS ANTENNA (TOP), SKETCH OF DRAG

DIRECTION (MIDDLE) AND PVC “H” PLATE (BOTTOM )...............................24

FIG. 2-19 –ANTENNA FOR THE SRS-FW400 SYSTEM (RED ARROWS SHOW

DRAGGING DIRECTION)......................................................................................25

FIG. 2-20 – ANTENNA “L” SUPPORTS AND BAR......................................................26

FIG. 2-21 – DOPPLER SUPPORTS.................................................................................26

FIG. 2-22 – SKETCH OF SRS LAYOUT ........................................................................27

FIG. 3-1 – SW SRS_PLUS INSTALLATION KIT..........................................................28