User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2

Safe Rail System Data Acquisition Software

2. THE SRS SYSTEM HARDWARE CONFIGURATION

The SRS system consists of the following parts:

• SRS_PLUS or SRS-FW400 Control Unit

• Notebook Computer

• Lan Cable

• Battery Cable

• Battery Pack

• Power supply cable

• Position sensor

• From one to four 400MHz antennas

2.1 The SRS_PLUS Control Unit

The

SRS_PLUS Control Unit

is the control unit responsible for directing the

antennas and digitalising the acquired radar data and it has the following ports:

• Lan Port

for a network connection to the Notebook Computer

• Battery Port

to connect the battery

• Wheel Port

to connect the position sensor wheel

• Ant. 1 - Ant. 2 – Ant. 3 – Ant. 4

for the connections to the radar antennas

• Start up button and indicator light

• Voltmeter

• Notebook connection port

Fig. 2-1 – View of Control Unit, start up side

LAN port

Battery Port

Start up

button

Switched on

indicator light

Battery

Voltmeter

Notebook

connection

port