User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2

Safe Rail System Data Acquisition Software

Fig. 2-8 – Lan Cable connection between the Notebook Computer and the Control

Unit (SRS_PLUS)

Fig. 2-9 – Lan Cable connection between the Notebook Computer and the Control

Unit (SRS-FW400 only)

•

Connect the

Control Unit

to the

Battery

using the

Battery Cable

(Fig.

2-10) as shown in (Fig. 2-11). Then connect the black and the red clamps

respectively to the negative and to the positive electrode of a Car B attery

(12V). The Voltmeter will automatically measure the battery voltage.

Lan port