User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
22 / 76
• SRS_PLUS only: Then connect the power supply cable to the PC POWER
SUPPLY port on the Control Unit and to the Notebook PC (see Fig. 2-14).
Fig. 2-14 – Power supply cable and connection to the Control Unit
2.5 Position radar sensor
As position sensor we provide a Deuta-Werke DRS05 Doppler system (see Fig. 2-15).
The Doppler system must be connected through its cable to the Doppler interface box
(Doppler port). Then you have to connect the wheel cable from the Doppler interface box
(wheel port) to the DAD CONTROL UNIT wheel port.
Fig. 2-15 – Position sensor
PC Power
Supply
connection
DOPPLER
SYSTEM
CONNECTION
PORT
WHEEL PORT
POWER PORT
DOPPLER
INTERFACE
BOX
CONNECTION
CABLE
DOPPLER PORT