User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2

Safe Rail System Data Acquisition Software

3. SOFTWARE CONFIGURATION OF THE SRS SYSTEM

This chapter describes the SW procedures you have to follow to correctly perform

a radar data acquisition.

3.1 Software Installation and configuration

Install the SW SRS_PLUS Kit as follows:

STEP1

execute the

SRS_PLUS.msi

file in the electronic support that comes

along with the instruments (Flash memory or CD).

Fig. 3-1 – SW SRS_PLUS installation Kit

STEP2

continue SW SRS_PLUS installation pushing NEXT.

Fig. 3-2 – Installation Kit, Next button