User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2

Safe Rail System Data Acquisition Software

4. SRS ACQUISITION SOFTWARE

The SRS_PLU S acquisition software is used to manage the phases of radar

acquisition and to review the data acquired directly on site.

The operative phases of the SRS_PLUS acquisition software occur in the

following sequence:

1. Start up the SRS_PLUS software

2. Choose the configuration

3. Set up the calibration

4. Choose the survey

5. Set the acquisition parameters

6. Acquire the radar data

7. Review the data

4.1 Starting the SRS_PLUS acquisition software

Once the Notebook Computer has been switched on, and the start up button on the

Control Unit has been pressed (a blue indicator light will be continuously lit),

open the

SRS_PLUS

acquisition software by clicking on the desktop icon shown

in Fig. 4-1.

Fig. 4-1 – Acquisition Software icon

Fig. 4-2 shows the SRS_PLUS acquisition software start up window.

Fig. 4-2 – SRS_PLUS acquisition software startup window

ICON

INDICATING

ACTIVATION

OF THE

CAMERA