User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
34 / 76
4.2 Choosing the configuration
The steps to be followed for choosing the required radar configuration for the
acquisition are given below.
1. Press the button (Fig. 4-2) to open the Radar selection
window (Fig. 4-3). This is where you can choose the antenna type and
configuration for the acquisition. In the example shown in Fig. 4-3, the
user has choosen a configuration file from the list. This file corresponds to
an array of 3X400M Hz antennas. Naturally the user can choose different
types of configuration for the SRS_PLUS system, as shown in Fig. 4-3,
selecting a configuration of between 1 and 3 antennas.
Fig. 4-3 – Radar selection window
2. The range can be changed with respect to the preset value by typing the
new value in the Range field (Fig. 4-4).
Fig. 4-4 – Range field