User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2

Safe Rail System Data Acquisition Software

the square has been successfully selected when it becomes bigger

now click with the right mouse button, the cursor will become a

cross that can move across the entire window

click with the right mouse button to position a point on the gain

curve on the graph; a text box linked to the cursor will indicate the

value in

and

of the point you intend to fix.

NOTE

A gain curve can only be reapplied to configurations with the same

starting conditions

You can apply the gain curve you desire to each single channel simply by

selecting the desired channel number beforehand.

You can choose from the following options shown in Fig. 4-11:

• Processed Sweep

activating this function, you can visualize how to

modify the sweep as a function of the chosen gain curve.

• Filter cut:

here you can select the cut frequency to apply to the sweep.

You can either choose the preset value of 100MHz or set a different

value in the dedicated textbox; we do however suggest you select the

preset cut frequency value of 100M Hz.

• Contrast:

you can select the contrast value here to be applied to the

radar map.

• Note:

you can write any comments here about the calibration file just

created.

Fig. 4-11 – Gain parameter settings window

Channel activated

which the gain curve

will be applied to

Gain curve