User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
42 / 76
Fig. 4-18 – Program shut-down window
4.3.1 Advanced Settings Menu
The Advanced Settings menu ( Fig. 4-20 ) can be selected by clicking on the
SRS_PLU S icon in the top left corner of the main window of the SW (Fig. 4-19),
or by mouse clicking twice on the grey bar at the top of the window.
Fig. 4-19 – Activating the Advanced settings menu
This menu allows you to set the following parameters:
• Wheel setting here you can set the acquisition mode of the system, which
can be either
o Wheel driven field selected, in this mode, the radar acquisition is
set using the position sensor.
o If the wheel is not used, you can set the radar acquisition to be
performed under a constant time regime; the value inserted in the
Auto Stacking field indicates the number of sweeps averaged
during the acquisition phase.
o The User Stacking function on the other hand allows you to control
the number of sweeps averaged. The acquisition is still controlled
in this configuration by the position sensor (wheel, hip-chain
encoder or manual trigger). Once the signal from the position
sensor has been received, the system performs an average of the
number of sweeps selected by the user and emits an acoustic signal
to confirm that the data has been saved.