User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
47 / 76
1. Pressing the button on the window shown in Fig.
4-25 automatically produces the NEW ACQUISITION window shown in
Fig. 4-27.
Fig. 4-27 – NEW ACQUISITION Window
2. To set the starting point coordinates, press the button
from the window shown in Fig. 4-27; this opens the window shown in Fig.
4-28.
3. The following acquisition parameters can be selected from the window
shown in Fig. 4-28:
i. File prefix: this consists of two fields which you can fill as you
wish. These fields form part of the scan identification (for example
you could use the initials of the street name). These two characters,
positioned after the first character which is either L or T deriving
from the next choice (see the following point), make up the second
and third of the 8 characters that identify the name of each single
section.
ii. The button allows you to open a virtual keyboard you can
use to edit the scan coordinate values.