User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2

Safe Rail System Data Acquisition Software

5. ERROR MESSAGES AND ALARMS

5.1 Error messages

Error messages found in the program are listed below (

in italics

) followed by their

solutions:

 Network error. Retry or check hardware!

Check that the network cable is connected properly to the PC and the SRS_PLUS

Control Unit. Try restarting the program.

 Warning. Unable to print on the selected printer

Check that the printer is switched on and connected to the computer.

 Unable to review: calibration file has been lost.

 Gain calibration has been skipped (or lost). Calibrate gain to proceed..

 Unavailable: gain calibration has been skipped (or lost).

 Unavailable: gain calibration has changed.

A calibration has to be performed to be able to acquire data. See Paragraph 4.3 for

calibration instructions.

 Unavailable: directory has been lost.

The last acquisition cannot be recovered, select a new acquisition.