User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
66 / 76
APPENDIX B - SRS SYSTEM TECHNICAL SPECIFICATIONS
B.1 - SRS_PLUS System Technical Specifications
The SRS_PLUS system is only compatible with SRS_PLUS 400MHz
Hardware
 SRS_PLUS Control Unit
 Master Unit: IDS recommends the use of the Panasonic CF30 notebook
computeras shown in picture Fig. B. 1 .
Software
 SRS data acquisition software
B.1.1 SRS_PLUS Control Unit specifications
The technical specifications of the SRS_PLUS Control Unit are given below
 Maximum number of acquisition channels: 4
 Pulse Repetition Frequency: 400KHz
 Range: 0-9999nsec. (recommended 90ns)
 Number of Stacks: 1–32 768
 Max number of scans/second: >1000
 Number of samples per scan: 128-8192(recommended 384/512)
 Trigger options: manual or timed
 Communication interface with the Master Unit: Ethernet
 Data transmission speed: 100 Mbit/sec
 Maximum dimensions of a single radar profile: depends on the Hard
Disk capacity
 GPS: supported
 Power supply: 12 Volt
 Power consumption: 18 Watt
 Water Proof: IP65
Fig. B. 1 – SRS_PLUS Control Unit and CF-30 Notebook