User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2

Safe Rail System Data Acquisition Software

APPENDIX D - USING CAMERA WITH THE SRS SYSTEM

The SRS system with Lumenera camera option, provided by IDS, has to be used

as following:

Step 1

Install the drivers of the camera in the acquisition PC launching the

dedicated CD-ROM for Lumenera camera, LM135C model, having a

resolution of 800x600 pixels (see Fig. D. 1) pressing in sequence

Next/Continue Anyway

buttons. As you finish with success the installation,

reboot the PC. To install correctly the drivers, user has to be connected as

System Administrator.

Fig. D. 1 – Videocamera “Lumenera LM135C”

Step 2

Connect the camera to the PC through USB port and activate it. After

launching the SW SRS_PLUS, you will see the icon besides the spies in

the opening window, as shown in picture on the label of the manual (see

icon here below).

Step 3

Select

External device settings

after having clicked on the SRS software

icon at the top left of the main window (see Fig. D. 2 and Fig. D. 3).