User's Manual

IDS Ingegneria Dei Sistemi S.p.A. Protocol: MN/2009/030 - Rev. 1.2
Safe Rail System Data Acquisition Software
76 / 76
!
NOTE
1. Make sure there is sufficient light into the camera (eg.
aperture is open as aperture controls the amount of light
entering camera) and exposure time in not set to 0 (you
can’t take a picture/video if exposure time is set to zero)
2. When upgrading Lumenera software, ensure the follow
steps are followed:
a. Unplug camera from USB
b. Uninstall the Lucam software
c. Reboot windows
d. Download the latest Lucam software:
http://www.lumenera.com/support/download.php
e. Install new Lucam software
f. Reboot windows
g. Plug camera back into the same USB port
h. Try acquiring pictures/video from a bright source (eg
bright room)
i. If there is no video, maybe it’s too dark due to wrong
software and hardware settings. Check 1. Ensure
software setting is correct to allow enough light into the
lens
j. If camera still doesn’t work, try upgrading drivers from
‘Device manager’