User's Manual

Temperature Unit
To change the display measurement unit, slide the °C/°F switch to
the desired setting.
User-defined Temperature Range
The default comfort temperature range for the baby’s bath water
is 90°F to 100°F (32°C to 37°C). To set a new water-temperature
range to the desired level:
1. Mix the water thoroughly to help ensure the temperature
is even.
2. Press and hold
MEMORY for two seconds.
3. Place the unit in the water, ensuring the thermo sensor on the
base of the unit is submerged in the water. While the unit is
taking a measurement, MEMORY flashes on the display and
the unit beeps for up to 10 seconds. Three short beeps will
sound to confirm the measurement has been stored.
4. The measured temperature appears on the LCD.
Basic Functions
11
OQ005 IM_v1 1105-PB 0216.indd 11 2/17/06 1:52:00 PM