User's Manual

The “Baby” unit measures the surrounding temperature. If “---” is
shown, the “Baby” unit cannot transmit the temperature reading.
Slide the °C/°F switch, located in the battery compartment of the
“Parent” unit, to the desired setting.
Clock/Alarm
To toggle between the clock and the alarm display, press the
MODE button.
Set Clock/Voice-Activation Sensitivity Level
1. To enter Setting mode, press and hold MODE button.
2. To change the setting, press
+ or – button. To scroll through
the numbers quickly, press and hold + or – button.
3. To confirm a setting and move on to the next one, press
MODE. The setting sequence is as follows:
1. 12/24-hour mode 3. Minute
2. Hour 4. Voice-Activation
Sensitivity Level (0-3)
Temperature Display
28
OQ005 IM_v1 1105-PB 0216.indd 28 2/17/06 1:52:13 PM