User's Manual

TABLE-STANDING OR WALL-MOUNTING

Table-standing:

Your unit comes with a stand connector for connecting it to other modular

units in the same series.

4. Assemble the front unit onto the compartment door.

BATTERY INSTALLATION: RINGER

1. Remove the screw on the bottom of the unit.

2. Pull out the battery door.

3. Insert two AA-size (UM-3) 1.5V batteries.

4. Close the battery door .

5. Replace the screw.

6. Hold down [ RESET ] with a blunt stylus.

A A

STAND

CONNECTOR