User's Manual

Note: These Oregon Scientific wireless models are compatible and will

activate each other if the system codes are set to be the same. For example,

if you install an additional Bell Push for your back door, make sure you

adjust the system code of the additional Bell Push to be the same as your

other Bell Push and your Ringer.

HOW TO USE THE PRODUCT

Once the Ringer and bell push are in place, pressing the bell button on the

bell push will activate the door chime in the chime pattern selected. Hold-

ing on to the button will ring the bell continuously.

TRANSMISSION COLLISION

Signals from other household devices, such as home security systems and

entry controls, may interfere with those of this product and cause temporar-

ily reception failure. This is normal and does not affect the general per-

formance of the product. The transmission and reception of signals will

resume once the interference recedes.

THE RESET BUTTON

The RESET button is used to enhance synchronization of signals after

battery replacement or when the unit is operating in an unfavorable way or

malfunctioning. Use a blunt stylus to hold down the button. All settings

will return to their original values.

PRECAUTIONS

This unit is engineered to give you years of satisfactory service if handled

carefully.

1. Do not immerse the unit in water.

2. Do not clean the unit with abrasive or corrosive materials.

CODE 1

CODE 2

CODE 3

CODE 4

CODE 5

CODE 6

CODE 7

CODE 8

CODE 9

CODE 10

CODE 11

CODE 12

CODE 13

CODE 14

CODE 15

CODE 16