User's Manual

EN
LISTEN TO AN EXTERNAL AUDIO SOURCE
1. Use a 1/8 (3.5 mm) audio cable (not supplied) to connect the audio
source’s headphone jack to the Aux in jack on your unit.
2. Press to enter AUX IN mode.
3. Use the controls on your connected device to play.
SPECIFICATIONS
Input power 12 V, 2.0 A AC/DC power adapter
Output power 2 x 10 W RMS
USB charging output port 5 V, 1 A
Battery CR2025 (for back-up source)
Bluetooth Version 4.0
L x W x H 200 x 89 x 72.9 mm
(7.9 x 3.5 x 2.9 in)
Weight 628g (1.4 lb)
PRECAUTIONS
• Use only fresh battery of the required size and type.
• Do not dispose old batteries as unsorted municipal waste. Collection of
such waste separately for special treatment is necessary.
• If you do not plan to use the unit for a long time, remove the battery.
Battery can leak chemicals that can damage electronic parts.
• Do not subject the device to excessive force, shock, dust, temperature
or humidity.
• Do not immerse the device in water. If you spill liquid over it, dry it
immediately with a soft, lint-free cloth.
• Do not clean the device with abrasive or corrosive materials.
• Do not tamper with the device’s internal components. Doing so
invalidates the warranty.
• Images shown in this manual may differ from the actual display.
• When disposing of this product, ensure it is collected separately for
special treatment.
• The contents of this manual may not be reproduced without the
permission of the manufacturer.
NOTE
The technical specications for this product and the contents of
the user manual are subject to change without notice.
NOTE
Features and accessories will not be available in all countries.
For more information, please contact your local retailer. To download an
electronic version of the user manual, please visit
http://global.oregonscientic.com/customerSupport.php.
ABOUT OREGON SCIENTIFIC
Visit our website www.oregonscientic.com to learn more about Oregon
Scientic products.
For any inquiry, please contact our Customer Services at
info@oregonscientic.com.
Oregon Scientic Global Distribution Limited reserves the right to interpret
and construe any contents, terms and provisions in this user manual and
to amend it, at its sole discretion, at any time without prior notice. To the
extent that there is any inconsistency between the English version and
any other language versions, the English version shall prevail.
EU-DECLARATION OF CONFORMITY
Hereby the manufacturer, IDT Technology Limited, declares that the
radio equipment type RESONANCE Clock Speaker (Model: CIR600)
is in compliance with 2014/53/EU Directive. The full text of the EU
Declaration of Conformity is available at the following internet address:
www.oregonscientic.com.
COUNTRIES RED APPROVED COMPLIED
All EU countries, Switzerland
CH
N
and Norway
CIR600_EN_UM_300103929-00001-10 XD 作认证 R1.indd 7 2017/10/25 下午2:23