User's Manual

Trio™ Activity Tracker

Device Information

Display

The Trio activity tracker displays the number of steps, distance in miles, calories burned, current time,

and status of your FIT goals. These reset every day at midnight, but the data is stored on your Trio for

up to a week.

It might also display these other messages:

• LOBAT—the battery is running low and needs to be recharged.

• DATA—the Trio is syncing your data with the website or mobile app.

• Trophy icon (flashing)—you’ve met 90% of your daily total-steps goal.

• Trophy icon (steady)—you’ve met a FIT goal.

• Bluetooth icon—the Trio is syncing with your mobile device via Bluetooth.

Alert

The Trio has a built-in alert to remind you to go for a walk throughout the day. An hour after your first

five-minute walk (minimum 300 steps), the Trio will beep. If it doesn’t move within 10 minutes, it will

beep again, and then a third time 10 minutes after that. The alerts will sound each hour until you meet

your daily frequency goal (for example, four 5-minute walks).

You can turn off the alert on your Settings page after you log in to the website. The change will take

effect the next time your Trio syncs.

Wearing

The Trio is most accurate when you wear it close to your body—in a pocket, clipped to a bra strap, or on

a belt or waistband.

Battery

The Trio has a rechargeable battery that should last up to two weeks. When you see the word “LOBAT”

flash on the Trio’s screen, it’s time to charge the battery. To charge it, plug the clip of your Trio into the

USB charging cable (with the white part and USB logo facing up, as shown). Then, plug the other end

into your computer’s USB port.

If the battery dies, the Trio will still save the existing data, but it won’t be able to record any new

information until the battery is recharged.

If you plug in the Trio to recharge the battery but the display doesn’t turn on, you might need to press

the small reset button (under the charging clip). Before you do this, try re-inserting the charging cable

the correct way into the Trio’s charging clip and your computer. If you press the Trio’s reset button, all

your data will be erased and the settings will be restored to the factory defaults.

PAGE 1
Trio™ Activity Tracker Device Information Display The Trio activity tracker displays the number of steps, distance in miles, calories burned, current time, and status of your FIT goals. These reset every day at midnight, but the data is stored on your Trio for up to a week. It might also display these other messages: • LOBAT—the battery is running low and needs to be recharged. • DATA—the Trio is syncing your data with the website or mobile app.
PAGE 2
Syncing To sync the Trio with your computer, you’ll need to plug in the small USB key and download and install the syncing software from our website. The Trio should sync automatically throughout the day if your computer is on, the USB key is plugged in, and the Trio is within 20 feet of it. To sync your Trio manually, press and hold the button while you’re within 20 feet of the USB key. The word “DATA” will appear on the display when it’s syncing.