Trio® Activity Tracker PE961 model User Manual ® is a trademark of Fortify Technologies, LLC.
Package contents The product contains the following items: • Trio® Activity Tracker • Strap • Clip • USB Key • USB Charger ® is a trademark of Fortify Technologies, LLC.
Trio® Tracker layout Charging the Trio® ® Tracker to the USB charger. Please follow (a) and (b) procedures. 1. Snap in the Trio (a) ® is a trademark of Fortify Technologies, LLC.
(b) 2. After being snapped in,, plug the end of the USB cable into the USB port of your PC. ® is a trademark of Fortify Technologies, LLC.
Attaching Trio® to the clip In attaching the Trio® to the clip, locate the “arrow” sign of the clip and the Trio® Tracker as this is your guide so that it will fit accordingly. See example images. (a) Top View (b) Rear View Attaching Trio® to the strap In attaching the Trio® to the strap, locate the “arrow” sign of the strap and the Trio® Tracker as this is your guide so that it will fit accordingly. See example image. ® is a trademark of Fortify Technologies, LLC.
Detaching Trio® from the Clip or Strap ® ® logo facing inwards, and ® ® logo and To remove the Trio Activity Tracker from the Strap, locate the Trio then push both edge of the Tracker. To remove the Trio Activity Tracker from the clip, locate the letter “ T “ of the Trio then on the left side facing inwards, push both edge of the Tracker. Setting up Trio® Tracker ® yet, or you need to replace it: If you haven’t activated your Trio ® Activity ctivity Tracker to wake it up for the first time. 1.
Wearing ® Tracker close to your body. To calculate your movement accurately, wear the Trio • Using the Clip • Using the Strap Syncing ® with your computer, you have to download and install the sync app from our To sync the Trio website and then you need to plug in the USB key. Please refer to this link. link (Note: You need to login first before downloading the application.
® manually: To sync your Trio 1. 2. 3. 4. Launch the application. Wait for the message “Insert a USB key to sync your Trio”. Once displayed, insert/plug-in the USB key. Wait for the message “Ready to sync”. ® tracker, go to “SYNC” screen then press and hold any of the touch 5. Using your Trio sensors for at least 3 seconds. (Note: There’s a syncing animation after pressing any of the touch sensors.) 6. Wait until the syncing is completed.
FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
