Datasheet

5
Base shield*1；
6 F-F Dupont wires，used to connect ports and SPI ports of Base Shield.
STEPS：
1. Insert the Base Shield directly onto the Catduino motherboard to make sure
the Micro SD card formatted as FAT16 or FAT32, then plug it into the Micro SD
card module.
2. Connect the Micro SD card module and SPI ports of the base shield using six
F-F Dupont wires
Base Shield Connection Wires Micro SD Card Module
GND Black Wire GND
VCC Red Wire VCC
MISO Yellow Wire MISO