Datasheet

IDUINO for Maker’s life

www.openplatform.cc

Reed Switch Module(SE015)

1 Introduction

It is a simple magnetic read module, you can sense whether there is a current or

magnetic field.

Specification

 Operation voltage: 5V

 Both digital and analog output pin

 Adjustable sensitive

 Size: 30*15mm

 Weight: 3g

2 Pinout

Description

Analog output pin, real-time output

voltage signal

Digital output pin, output Low or High

signal when there current or magnetic

exists

Power

Ground

3.example

The example show that Reed module and the interface comes with digital 13 LED

build a simple circuit to produce a Reed warning lamp 13 comes with digital interfaces

of the LED, the Reed sensor access number 3 interface, when Reed sensors Sensed a

key signal, LED lights, otherwise off.

PAGE 1
IDUINO for Maker’s life Reed Switch Module(SE015) 1 Introduction It is a simple magnetic read module, you can sense whether there is a current or magnetic field. Specification      Operation voltage: 5V Both digital and analog output pin Adjustable sensitive Size: 30*15mm Weight: 3g 2 Pinout Pin A0 D0 + G Description Analog output pin, real-time output voltage signal Digital output pin, output Low or High signal when there current or magnetic exists Power Ground 3.
PAGE 2
IDUINO for Maker’s life ********Code Begin******** int Led = 13 ; / / define LED Interface int buttonpin = 3; / / define the Reed sensor interfaces int val ; / / define numeric variables val void setup () { pinMode (Led, OUTPUT) ; / / define LED as output interface pinMode (buttonpin, INPUT) ; / / output interface as defined Reed sensor } void loop () SunFounder{ val = digitalRead (buttonpin) ; / / digital interface will be assigned a value of 3 to read val if (val == HIGH) / / When the Reed sensor detects