Datasheet

IDUINO for Maker’s life

www.openplatform.cc

Easy Ball Switch sensor(SE023)

1 Introduction

This module called Ball switch sensor. When this module be tilted, it will output low

or high signal for your control. It’ similar with the Ball Switch Sensor(SE059), the

difference is that this module has one indicator light, which would be on when this

module’s voltage signal is changed. And, this module has integrated 3-pin terminal,

which can be simply and tidily connected with Arduino sensor expansion board, like

the following picture:

Specification

 Operation voltage: 5V

 With 3-Pin Jumpers

 Size:25*15mm

 Weight：4g

2 Pinout

Description

OUT

If the sensor detect a tilt, this pin

output low or high level signal

PAGE 1
IDUINO for Maker’s life Easy Ball Switch sensor(SE023) 1 Introduction This module called Ball switch sensor. When this module be tilted, it will output low or high signal for your control. It’ similar with the Ball Switch Sensor(SE059), the difference is that this module has one indicator light, which would be on when this module’s voltage signal is changed.
PAGE 2
IDUINO for Maker’s life Vcc Gnd Power Ground 3.Example In this example, you need connect a LED to pin13 to see when this module be rotated, what will happen.
PAGE 3
IDUINO for Maker’s life digitalWrite (Led, HIGH); } else { digitalWrite (Led, LOW); } } ******Code End****** www.openplatform.